Sonic Alert Digital Program Controller DCP301 - Manual (Page 7)

Organization of This User’s Manual
v
This manual is organized as follows.
Chapter 1. GENERAL
This chapter describes DCP301 applications, features and basic function blocks. It
also gives a list of model numbers.
Chapter 2. NAMES & FUNCTIONS OF PARTS
This chapter describes the names and functions of DCP301 parts, input types and
range Nos.
Chapter 3. MOUNTING
This chapter describes how to mount the DCP301 on control panels. This chapter
is required reading for designers of control systems using the DCP301.
Chapter 4. WIRING
This chapter describes the precautions when wiring the DCP301 to a control
system and how to wire the DCP301. This chapter is required reading for
designers of control systems and supervisors of wiring work.
Chapter 5. FUNCTIONS
This chapter describes the functions of the controller. This chapter is required
reading for designers of control systems using the DCP301.
Chapter 6. OPERATION
This chapter describes how to switch the basic display states of the DCP301, and
select and run programs. This chapter is required reading for designers of control
systems using the DCP301 and users of the DCP301.
Chapter 7. PARAMETER SETUP
This chapter describes how to set up parameters on the controller and the meaning
of settings.
Chapter 8. PROGRAM SETUP
This chapter describes how to set up programs on the controller and the meanings
of settings.
Chapter 9. TROUBLESHOOTING
This chapter describes points to check when the DCP301 is not working properly
or how to remedy trouble that might occur.
Chapter 10. SPECIFICATIONS
This chapter describes the general specifications, performance specifications and
external dimensions of the DCP301.
Chapter 11. CALIBRATION
This chapter describes calibration procedures for the functions of the DCP301.