Omega RD100B - Manual (Page 10)

viii
How to Use This Manual
This user’s guide consists of the following sections.
For details on communication functions, see the RD100B/RD1800B Communication
Interface User’s Manual on the CD-ROM.
Chapter Title and Description
1 Functional Description
Describes the functions of the RD100B Recorder. Refer to this chapter when you
are unsure of the details of the function that you are operating.
2 Before Using the Recorder
Describes the installation and wiring procedures.
3 Names of Parts and Run Operations
Describes the names of each part of the recorder and the daily operations.
4 Common Operations for Setting Functions and Setup Guide
Describes the execution modes of the recorder, basic setup operations using keys,
and provides a function setup guide.
5 Frequently Used Setup Operations (Setting Mode)
Describes how to change the input range, alarms, chart speed, etc.
6 Setup Operations for Convenient Functions (Setting Mode)
Describes the setup operations for convenient functions such as how to assign tags
to channels and how to set message strings that are to be printed.
7 Setup Operations for Changing/Adding Functions (Basic Setting Mode)
Describes the setup operations for changing or adding functions such as setting the
recorder to detect sensor burnouts and changing the contents that are printed on the
chart paper.
8 Setup Operations for Changing the Displayed Contents
Describes how to select the display type suitable for the application.
9 Operations Related to the Computation Function (/M1 Option)
Describes all operations related to the computation function.
10 Troubleshooting
Describes error message and troubleshooting measures of the RD100B Recorder.
11 Maintenance
Describes periodic inspection, calibration, pen adjustment/printer carriage
adjustment, and recommended replacement period for worn parts.
12 Specifications
Gives the specifications of the RD100B Recorder.
Appendix Describes the printout contents.
Index
Note
• This user’s manual covers information regarding the recorders with English as the display/
recording language (suffix code “2”).
• For the procedure of setting the display/recording language, see section 7.14, “Changing the
Display/Recording Language.”