Omega RD100B - Manual (Page 221)

12-19
Specifications
12
Standard Performance
Item Specifications
Measurement and recording accuracy
The following specifications apply to operation of the recorder under standard operation conditions:
Temperature:
23 ± 2°C
Humidity: 55% ± 10%RH
Power supply voltage: 90 to 132 or 180 to 264 VAC
Power supply frequency: 50/60 Hz ± 1%
Warm-up time:
At least 30 minutes.
Other ambient conditions such as vibration should not adversely affect the operation
Measurement (Digital Display)
Input Type
Recording (Trend)
Highest Res. Measurement Accuracy Recording Accuracy Resolution
10 µV Measurement
accuracy
± (0.3% of
recording span)
1 mV
±(0.15% of rdg + 1)
±(0.1% of rdg + 2 digits)
except R,S: 0 to 100°C, ±3.7°C
100 to 300°C, ±1.5°C
B: 400 to 600°C, ±2°C
except ±(0.15% of rdg + 1°C)
0.1°C
1 mV
10 mV
Accuracy not warranted for
values less than 400°C
Range Type
±(0.1% of rdg + 2 digits)
±(0.1% of rdg + 2 digits) 10 mV
1 mV
±(0.15% of rdg + 0.7°C)
for –200 to –100°C
±(0.15% of rdg + 0.5°C)
±(0.15% of rdg + 0.5°C)
except ±(0.15% of rdg + 0.7°C)
for J: –200 to –100°C
±(0.15% of rdg + 0.7°C)
±(0.15% of rdg + 1°C)
±(0.15% of rdg + 0.5°C)
except ±(0.15% of rdg + 0.7°C)
for L: –200 to –100°C
Pen model:
Dead band 0.2%
of recording span
Dot model:
Resolution 0.1 mm
10 µV
100 µV
±(0.2% of rdg + 1°C)
±(0.15% of rdg + 0.3°C)
DC voltage
TC
DC voltage
(excludes
RJC
accuracy)
RTD
ON/OFF input
20 mV
60 mV
200 mV
2 V
6 V
20 V
R
1-5 V
S
B
K
E
J
N
L
W
T
U
50 V
WRe
Pt100
JPt100
Level
Contact
– Threshold level (2.4 V)
accuracy ± 0.1 V
≤ 1 KΩ: ON, ≥ 100 kΩ: OFF
(Parallel capacitance
0.01 µF or less) –
Measuring accuracy in case of linear scaling
Accuracy during scaling (digits) = measuring accuracy (digits) × multiplier + 2 digits (rounded up)
where the multiplier = scaling span (digits)/measuring span (digits).
Example: Assuming that
• range type:
1-5 V
• measuring span: 1.000 to 5.000 V
• scaling span: 0.000 to 2.000 Then,
Measuring accuracy = ±(0.1% × 5 V + 2 digits)
= ±(0.005 V [5 digits] + 2 digits)
= ±7 digits
Multiplier = {2000 digits (0.000 to 2.000)}/4000 digits (1.000 to5.000) = 0.5
Accuracy during scaling = ±(7 × 0.5 + 2) digits = 6 digits (rounded up)
Reference junction compensation
Internal/External selectable for each channel
12.6 General Specifications