Caution – Omega RD100B User Manual
Page 67
3-9
Names of Parts and Run Operations
3
3.4
Installing/Replacing the Ribbon Cassette (Dot
Model)
CAUTION
• Improper cassette insertion may cause the color to change or damage the ribbon.
• Do not apply upward force to the printer carriage. If you do, the carriage position
may be offset, and the recorder may not print correctly.
1.
Open the door.
If recording is in progress, press the
RCD
key to stop the recording.
2.
Press the
FUNC
key.
3.
Press the
(
DISP
) key several times to display
R. exchange.
Func=R. exchange
4.
Press the
(
CH UP
) key.
The printer carriage moves near the center position, and
R. exchange = End is
displayed.
5.
Open the display and key panel section.
You can open the display and key panel section by holding the tab at the lower
left and pulling it toward you.
Note
If the recorder is OFF, pinch the printer carriage and move it near the center position.
Printer carriage
6.
Remove the ribbon cassette.
Pull the left-hand part of the ribbon cassette so that the cassette holder tab
disengages, and pull the ribbon cassette out from the recorder case.
Holder tab