Omega RD100B - Manual (Page 70)

3-12
3.6 Switching the Display Screen
This section describes the procedure for switching the display screen.
To change the displayed content, see chapter 8.
Procedure
Switching the Display Screen
The display screen switches each time the DISP key is pressed.
Screen 01 through 15 are switched in order. Screens that are set to “Skip” are skipped.
Channel Auto Switching
On screens that show the measured values and computed values, the displayed channel
is automatically switched in ascending order. The switching interval can be set to 1 s, 2
s, 3 s, 4 s, or 5 s.
Measurement channels set to Skip and computation channels set to OFF are not
displayed.
Switching the Displayed Channel Using Keys
If auto switching is not specified, the channel switches each time the CH UP key is pressed
in ascending order. All channels are displayed in order.
Note
The operation is different between auto channel switching and manual switching using keys
on the 2-channel digital display.
03
04
05
06
01
02
02
03
03
04
01
02
During auto switching
When switching using keys