Omega RD100B - Manual (Page 92)

4-15
Common Operations for Setting Functions and Setup Guide
4
Item Description Reference
Section
Periodic printout
Measured value
Scale
Channel number
or tag
Recording color
Mar.31.2004!
15:50*
1 1.000V
2 -1.000V
0.000
2.000
1 V
RED
50mm/h_
• Printout interval 7.8
Use Print 1 in Basic Setting mode to set the periodic printout interval.
• Type of measured values to be printed/disable periodic printout 7.8
Use Print1 in Basic Setting mode to set the type of measured values to be
printed.
You can select Inst, Report (statistical calculation value), or Off.
If Report is selected, use Print2 in Basic Setting mode to select the report
data type.
• Scale printout and recording color printout (pen model) 7.7
Use Print > Scale in Basic Setting mode to turn scale printout On/Off.
Use Print > Pen color in Basic Setting mode to turn pen color printout On/Off
(pen model).
• Turn On/Off periodic printout for each channel 6.6
Use Aux > Print out in Setting mode to enable/disable the periodic printout on
each measurement channel.
Channel/tag selection Use Print > CH/Tag in Basic Setting mode to select whether to use channel
numbers or tags in printouts.
7.7
Alarm occurrence/release printout
• Turn printout On/Off 7.7
Use Print > Alarm in Basic Setting mode to select whether to print the alarm
occurrence and release, print only the alarm occurrence, or not print.
• Time printout format 7.16
Use Personalize > Time print > Alarm in Basic Setting mode to set the time
printout format when printing alarm occurrence/release.
Recording Start Printout • Turn printout On/Off 7.7
Use Print > Record On in Basic Setting mode to enable/disable the recording
start printout.
• Time printout format 7.16
Use Personalize > Time print > RCD On in Basic Setting mode to set the time
printout format.
New chart speed printout
• Turn printout On/Off 7.7
Use Print > Chart speed in Basic Setting mode to set whether to print the new
chart speed when the chart speed is changed.
• Time printout format 7.16
Use Personalize > Time print > C. Speed in Basic Setting mode to set the time
printout format.
Message printout • Set the message string 6.8
Use Aux > Message to set the message string to be printed.
• Time printout format 7.16
Use Personalize > Time print > Message in Basic Setting mode to set the time
printout format.
• Execute the message printout 3.10
Use FUNC key > Message in Operation mode to execute the message printout.
Tag • Channel/tag selection 7.7
Use Print > CH/Tag in Basic Setting mode to select whether to use channel
numbers or tags in printouts.
• Tag name 6.7
Use Aux > Tag in Setting mode to set the tag name.
Date format Use Date format > Type in Basic Setting mode to set the printout/display format 7.19
of the date.
4.4 Function Setup Guide