5 starting/stopping the recording – Omega RD100B User Manual
Page 69
3-11
Names of Parts and Run Operations
3
3.5
Starting/Stopping the Recording
This section describes the procedures for starting/stopping the recording and checking
the recorded result.
Procedure
Starting the Recording
Press the
RCD
key to start recording.
The status display shows the word “RECORD.”
Stopping the Recording
While recording is in progress, press the
RCD
key to stop recording.
The word “RECORD” on the status display clears.
Feeding the Chart Paper
The chart paper is fed while the
FEED
key is held down.
Viewing the Recorded Results
Pull the front cover tab of the chart cassette to open the front cover. The recorded chart
paper can be pulled out for viewing.
Front cover tab
Recorded chart paper can
be pulled out.
<Related Topics>
Changing the chart speed: Section 5.4