5 display – Omega RD100B User Manual

Page 36

Advertising
background image

1-22

1.5

Display

Displayed Information

Main Display

The recorder is capable of displaying measured values, alarm information, and so on the

VFD (Vacuum Fluorescent Display). Using normal fonts, 17 characters × 2 lines can be
displayed. Using large fonts, 11 characters can be displayed.

Main display

Status display

RECORD

MATH

CHART END

ALARM

1 2 3 4 5 6

KEY LOCK

There are 22 display types available. Also, different displays can be assigned to the top

and bottom sections of the main display. These display types can be registered to

screens 1 to 15 and switched during operation using the keys.

Status Display

A status display is available at the bottom of the main display. The indicators below turn

ON/OFF.

• RECORD

This indicator turns ON when recording is started and turns OFF when stopped.

• ALARM 1 2 3 4 5 6

The numbers correspond to measurement channel numbers. The indicator turns ON

when an alarm occurs and turns OFF when the alarm is released.

If the alarm indication is set to hold operation, the indicator blinks when an alarm

occurs. When alarm ACK operation is performed, the indicator turns ON or OFF.

• MATH

This indicator turns ON when computation on the computation function (/M1 option) is

started and turns OFF when stopped.

• KEYLOCK

This indicator turns ON when key lock is enabled and turns OFF when disabled.

• CHART END

This indicator turns ON when the remaining amount of chart paper falls to

approximately 2 cm on models with the FAIL/chart end function (/F1 option).

Display Types

The following display types are available.

• Displays that show measured values

Measured values can be displayed numerically or using bar graphs. The channels

that are displayed can be switched automatically at constant intervals.

The bar graph displays 0 to 100% using 101 points.

0%

100%

101 dots

• Displays that show alarms

• Displays that show the date/time and chart speed

• Displays that show the remote control input and alarm output relay statuses

• Displays that show the status

• System display

Different display types can be assigned to the top and bottom sections of the main display.

Advertising