Omega RD100B - Manual (Page 150)

7-27
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
7
7.17 Initializing the Settings
This section explains the details of initializing the recorder settings to their factory
default.
Be careful, because all settings except the date/time setting in the recorder will be
initialized.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Procedure
1. Hold down the MENU key for 3 seconds to enter Setting mode.
2. Hold down the and keys simultaneously for 3 seconds to enter Basic
Setting mode.
3. Press the key or SHIFT + key to select Initialize and then press the
key.
4. Press the key to select the settings to be initialized and then press the
key.
Set: Initializes the settings in Setting mode.
Setup+Set: Initializes the settings in Basic Setting mode and Setting mode.
5. To execute the initialization, press the key to select Yes and then press the
key.
The settings are initialized, and the recorder returns to Operation mode.
To cancel the initialization, press the ESC key The screen returns to the
Basic=Initialize screen.
If you press the key to select No and press then the key, nothing
happens.
Select the range to be initialized.
Select Yes and press to execute
initialization and return to Operation
mode. ESC/?
Basic=Initialize
Mode=Setup+Set
Are you sure?=No
Explanation
Items That Are Not Initialized
The following items are not initialized.
• Adjustment value of the pen position and the adjustment value of the printer carriage
position (Basic Setting mode)
• Date/Time (Setting mode)