Omega RD100B User Manual
Page 152
7-29
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
7
Explanation
Remote No.
The remote control terminal numbers are from 1 to 5.
Function to Be Assigned
Record On/Off: Starts/stops recording.
Alarm ACK:
Executes alarm output release.
Time adjust:
Adjusts the internal clock to the nearest hour.
Manual print:
Executes manual printout.
Message #:
Prints message # (where # is a value between 1 and 5).
Chart speed:
Changes the chart speed.
Math start/stop: Starts/stops the computation on the computation function (/M1 option).
Math reset:
Resets the computed result of the computation function (/M1 option).
None:
No function is assigned.
<Related Topics>
Setting the secondary chart speed: Section 6.9
7.18 Assigning Functions to the Remote Control Input Terminals (/R1 Option)