Omega RD100B - Manual (Page 226)

App-3
Periodic Printout and Printout Using the TLOG Timer (/M1 Option)
App
Dot Model
Instantaneous Mode
Prints the letter “d” for channels set to
delta computation.
Alarm
Unit
Channel No.
or tag Measured
value
Date
Time
Channel data
Computation channel
Scale
Chart speed
Time tick
Mar.31.2004
15:50
TAG-001 1.000V
2 -1.000V
3 H-2.1050UNIT03
4 d 2.000V
TAG-00A 1UNIT0A
J L -1.00UNIT0J
0.000 2.000
TAG-001
V
50mm/h_
• Date/Time
The date/time when the periodic printout was executed.
• Time tick
Indicates the position at the time the periodic printout was executed. If the time tick
cannot be printed correctly, it is not printed.
• Channel data, alarm, scale printout, and chart speed
These are the same as with the instantaneous mode of the pen model.
Report Mode
Sum value
Min./Max./Ave.
Time tick
Unit
Range change occurrence mark
Measured value
Channel No. or tag
Report start date/time
Report end date/time
Channel data
Computation channel
Scale
Chart speed
Event
Mar.31.2004 15:00
-Apr.01.2004 15:00*TPR
TAG-001*1.000V
2 -1.000V
3 -2.105500E+03UNIT03
4 2.000V
TAG-00A 1UNIT0A
C *1.00
D -10.00UNIT0D
150.00UNIT0D
100.00UNIT0D
E 1.0000%
J -1.00UNIT0J
0.000 2.000
TAG-001
V
50mm/h_
,
• Report start date/time and report end date/time
The start date/time and end date time of the report (statistical calculation) (periodic
printout interval).
• Time tick
This is the same as with the instantaneous mode.
• Event
This is the same as with the report mode of the pen model.
• Channel data
This is the same as with the report mode of the pen model. However, the channel
numbers are 1 to 6 or A to P.
• Scale and chart speed
These are the same as with the instantaneous mode of the pen model.
Appendix 1 Periodic Printout and Printout Using the TLOG Timer (/M1 Option)