1 starting/stopping/resetting the computation – Omega RD100B User Manual
Page 158
9-1
Operations Related to the Computation Function (/M1 Option)
9
9.1
Starting/Stopping/Resetting the Computation
This section explains the details of starting/stopping the computation and resetting the
computed values of computation channels.
Procedure
Starting the Computation
1.
Press the
FUNC
key.
2.
Press the
key to show Math and then press the
key.
3.
Press the
key with Start shown on the screen.
The computation starts, and the screen switches to the data display screen.
The word MATH in the status display comes on.
Math=Start
Stopping the Computation
1.
Press the
FUNC
key.
2.
Press the
key to show Math and then press the
key.
3.
Press the
key with Stop shown on the screen.
The computation stops, and the screen switches to the data display screen.
The word MATH in the status display clears.
Math=Stop
Resetting the Computed Values of All Computation Channels to 0
This operation can be executed only when the computation is stopped.
1.
Press the
FUNC
key.
2.
Press the
key to show Math and then press the
key.
3.
Press the
key to show Reset and then press the
key.
The computed values of all computation channels are reset, and the screen
switches to the data display screen.
Math=Reset
Chapter 9 Operations Related to the Computation Function (/M1 Option)
* When the key or key is pressed while holding down the SHIFT key, the operation is
reversed as when the respective key is pressed by itself.