Omron CQM1H-CLK21 - Manual (Page 151)

128
Setting Data Links Section 5-2
SAMPLE4.CLK: Receiving Only Part of Send Data and Offsets
Only area 2 is used in this example.
Note A Controller Link Support Board is used in this example. The Support Board
does not have memory areas. The area settings are ignored and byte
addresses are used. Refer to the Controller Link Support Boards Operation
Manual (W307) for details on using a Controller Link Support Board.
Data Link Area Structure
Device Information Setting
Data Link Areas
Area 2
(Byte addresses)
Node 1 Node 2 Node 3 Node 4
IBM PC/AT or
compatible C200HX C200HX C200HX
00000
00020
D00000
D00010
D00000
D00010
D00000
D00010
00040 D00019 D00019 D00019
00060
00080
00100
00119
#1B
#1C
#2
#3
#4
#1A
#2
#1C
#3
#1B
#4
#1A