Omron CQM1H-CLK21 - Manual (Page 98)

75
Wiring Section 3-3
Optical Fiber Cables with Connectors (Indoor Use Only)
The following Optical Fiber Cables are available with Connectors already
attached.
Note 1. Consult a specialist tradesman if cables with outdoor specifications are re-
quired.
2. The cables listed above are black and have power supply lines and tension
members, although the power supply lines aren’t used in the Controller
Link Network.
3. All of the cables listed above are attached to the connectors with adhesive.
4. Special training is required to assemble Optical Fiber Cables and connec-
tors with adhesive.
Optical Fiber Cable Accessories
Use the following accessories to assemble and test Optical Fiber Cables.
This manual does not provide details on Optical Fiber Cable preparation. For
details, refer to the instructions provided with the CAK-0057 or the S3200-
CAK1062 Assembly Tool.
Specifications Length Model
Optical Fiber Cable Connectors:
S3200-COCF2071
⇓
S3200-COCF2071
2 m S3200-CN201-20-20
5 m S3200-CN501-20-20
10 m S3200-CN102-20-20
15 m S3200-CN152-20-20
20 m S3200-CN202-20-20
Over 20 m S3200-CN-20-20
(Specify length (m) when ordering.)
Optical Fiber Cable Connectors:
S3200-COCF2071
⇓
S3200-COCF2571
2 m S3200-CN201-20-25
5 m S3200-CN501-20-25
10 m S3200-CN102-20-25
15 m S3200-CN152-20-25
20 m S3200-CN202-20-25
Over 20 m S3200-CN-20-25
(Specify length (m) when ordering.)
Optical Fiber Cable Connectors:
S3200-COCF2571
⇓
S3200-COCF2571
2 m S3200-CN201-25-25
5 m S3200-CN501-25-25
10 m S3200-CN102-25-25
15 m S3200-CN152-25-25
20 m S3200-CN202-25-25
Over 20 m S3200-CN-25-25
(Specify length (m) when ordering.)
Name Model Specifications Manufacturer
Optical Fiber Assembly
Tool CAK-0057 Crimp-cut tool for the S3200-COCF2071/2571 Con-
nectors Sumitomo Electric
Industries, Ltd.
Optical Power Tester CAT-2700 With CAT-2702 Head Unit and adapter for the S3200-
COCF2071/2571 Connectors
Master Fiber Set CAT-2001H One meter cable for use with the CAT-2702 Head
Unit