TANDBERG 6000MXP - Manual (Page 103)

103
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
OSD Mode: <On/Off>
Enables/disables the On Screen Display (OSD). If set to Off there will be no graphics displayed on the monitors.
Example: xconfiguration osd mode: on
OSD Menu Mode: <On/Off>
Enabled/disables the navigation menu on the system. If set to Off no system menus may be entered, but the system will still display icons, call progress
information boxes etc. We recommend that you to set this to Off when controlling the system from an external control system.
Example: xconfiguration osd menu mode: off
OSD Menu Password: <S: 0, 5>
If a Menu Password is defined, the user has to enter this password when accessing the Administrator Settings page in the menu.
Example: xconfiguration osd menu password: 123
OSD Menu Language: <English/German/Norwegian/French/Swedish/Danish/Italian/Portuguese/Japanese/Chinese/TraditionalChinese/Russian/Spanish/Korean/Finnish/Thai/
Arabic>
Defines the menu language.
Example: xconfiguration osd menu language: norwegian
OSD Menu WelcomeMenu: <On/Off>
The Welcome Menu contains the Main Menu, System Status, System Name and Dial in numbers.
If set to On, the Welcome Menu is shown when the system wakes up from standby mode.
If set to Off, the Welcome Menu is not shown when the system wakes up from standby mode.
However, pressing the OK button on the remote control will display the Welcome Menu.
Example: xconfiguration osd menu welcomemenu: on
OSD Menu DisplayWelcomeText: <On/Off>
If DisplayWelcomeText is set to Off, the system will use the system name and dial in numbers as default Welcome Text.
If set to On the system will display the Welcome Text defined by the user.
Example: xconfiguration osd menu displaywelcometext: on
OSD Menu WelcomeText: <S: 0, 30>
Welcome Text to display if DisplayWelcomeText is set to On.
Example: xconfiguration osd menu welcometext: “Welcome to MyTANDBERG”
OSD Menu DisableTimeout: <On/Off>
If set to On, the menu will not time out automatically. Press
Cancel on the remote control to hide the main menu manually.
If set to Off, the menu will time out automatically after 15 seconds if there is no activity on the remote control. The timeout applies when the system is in
a call only. Outside a call, the menu will not time out.
Example: xconfiguration osd menu disabletimeout: off
OSD Menu BalloonHelp: <On/Off>
Enables/Disables the Balloon Help window.
Example: xconfiguration osd menu balloonhelp: on
OSD
cont...