TANDBERG 6000MXP - Manual (Page 97)

97
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
Key MicOff: <On/Off>
Enable or disable the given key (yellow Mic Off key) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key micoff: on
Key Presentation: <On/Off>
Enable or disable the given key (blue Presentation key) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key presentation: on
Key VolumeUp: <On/Off>
Enable or disable the given key (Volume +) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key volumeup: on
Key VolumeDown: <On/Off>
Enable or disable the given key (Volume –) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key volumedown: on
Key Ok: <On/Off>
Enable or disable the given key (OK - Menu key) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key ok: on
Key ZoomIn: <On/Off>
Enable or disable the given key (Zoom +) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key zoomin: on
Key ZoomOut: <On/Off>
Enable or disable the given key (Zoom –) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key zoomout: on
Key Grab: <On/Off>
Enables/disables the signal which is sent to the codec when grabbing and touching the rubber lines on each side of the TANDBERG Remote Control.
Example: xconfiguration key grab: on
Key Cabinet: <On/Off>
Enables/disables the headset key in front of the cabinet. Applies to TANDBERG 1000 MXP only.
Example: xconfiguration key cabinet: on
Key Presets: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control (TRC4), and using configuration instead of commands.
Example: xconfiguration key presets: on
Key
cont...