TANDBERG 6000MXP - Manual (Page 121)

121
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
Video
cont...
— VNC
Video Outputs DVI [1..x]
x = 2 on 6000 MXP
x = 1 on 3000 MXP Mode: <On/Off>
Turns On/Off the DVI outputs.
NOTE! We recommend that you turn off video all unused video outputs.
Example: xconfiguration video outputs DVI 1 Mode: On
VNC IPAddress: <S: 0, 64>
Defines the IP address of the VNC server.
Example: xconfiguration vnc ipaddress: 10.47.15.49
VNC DisplayNumber: <S: 0, 5>
The displaynumber of the VNC service. This number must matcht the displaynumber of the VNC server.
Example: xconfiguration vnc displaynumber: 2
VNC Password: <S: 0, 8>
Defines the password to use when connecting to the VNC service.
Example: xconfiguration vnc password: xxx