TANDBERG 6000MXP - Manual (Page 173)

173
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
Protocol: G711 / G722 / G722.1 / G728 /AAC-LD
Rate:
Video [1..2] (status = Active / Inactive ):
If status = Inactive the following will be included:
<Nothing>
If status = Active the following will be included:
Protocol: H261 / H263 / H263+ / H264
Resolution: QCIF / SQCIF / CIF / 2CIF / 4CIF / ICIF / SIF / 4SIF /ISIF /VGA / SVGA / XGA / QVGA / 448p / 400p / w288p / w448p / w576p / w720p
Rate:
Data (status = Active / Inactive ):
If status = Inactive the following will be included:
<Nothing>
If status = Active the following will be included:
Type: LSD / MLP
Protocol: FECC
Rate:
Call
cont...