TANDBERG 6000MXP - Manual (Page 168)

168
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
BRI [1..6] (ready= Unknown / True / False )
If ready = Unknown / True , the following will be included:
Channel [1..2] (type = BChannel , status= Idle / Calling / Answering / Proceeding / Connect / Disconnecting / Disconnected )
If type = Bchannel and status= Idle , the following will be included:
<Nothing>
If type = Bchannel and status = Calling / Answering / Proceeding / Connect the following will be included:
CallingNumber:
ConnectionTime:
If type = Bchannel and status = Disconnecting / Disconnected the following will be included:
CallingNumber:
CauseLocation:
ChannelCause:
ConnectionTime:
If ready = False the following will be included:
Layer1Alarm: <NA>
Layer2Alarm: <NA>
Example – see overleaf.
BRI