TANDBERG 6000MXP - Manual (Page 184)

184
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
CameraTracking (status = On / Off ):
If status = On / Off the following will be included:
<Nothing>
Example:
*s CameraTracking (status=Off): /
*s/end
*s CameraTracking (status=On): /
*s/end
CameraTracking