TANDBERG 6000MXP - Manual (Page 46)

46 D 13887.08
MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
XACLI – Configuration Type Operation
About the TANDBERG API
Three operations can be performed on
configurations:
Configuration Help •
Configuration Read •
Configuration Set (Write) •
About Configuration Operations Configuration Help Configuration Read
Configuration Set (Write)
To get help on configurations, type ? after the configuration path
(address expression):
<configuration-type command> <address expression> ?
EXAMPLE:
xconfiguration h323gatekeeper discovery ?
*h xConfiguration H323Gatekeeper Discovery: <Manual/Auto>
OK
To read configurations from the system just type the root command
(
xConfiguration / xDirectory ) followed by the path (address
expression):
<configuration-type command> <address expression>
EXAMPLE:
xconfiguration h323gatekeeper discovery
*c xConfiguration H323Gatekeeper Discovery: Manual
OK
Type a root command ( xConfiguration / xDirectory ) followed by
a valid path (address expression). The path must be terminated with a
colon before the value is added.
<configuration-type command> <address expression>: <value>
EXAMPLE:
xConfiguration H323Gatekeeper Discovery: Manual
Note!
*h • is used when returning the result
of a help query
*c is used when returning the result •
of a read query
Nothing is used for configuration set •
*d is used when returning the result •
of an xdirectory read query.