TANDBERG 6000MXP - Manual (Page 194)

194
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
FarEndInformation :
FECC (status = On / Off )
If status = Off the following will be included:
<Nothing>
T140: Off
SString: Off
Example:
*s FarEndInformation:
FECC (status=Off): /
T140: Off
SString: Off
*s/end
If status = On the following will be included:
NumberOfPresets: x
NumberOfSources: x
Source [1..x]:
Name:
Capabilities: “ptzfms”
CurrentSource:
BroadcastSwitch: On / Off
T140: On/Off
Sstring: On/Off
FarEndInformation