TANDBERG 6000MXP - Manual (Page 95)

95
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
Key Number2: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key number2: on
Key Number3: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key number3: on
Key Number4: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key number4: on
Key Number5: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key number5: on
Key Number6: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key number6: on
Key Number7: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key number7: on
Key Number8: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key number8: on
Key Number9: <On/Off>
Enable or disable the given key on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key number9: on
Key Star: <On/Off>
Enable or disable the given key (*) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key star: on
Key Square: <On/Off>
Enable or disable the given key (#) on the TANDBERG Remote Control, and using configuration instead of commands.
Example: xconfiguration key square: on
Key
cont...