Preset [1, Preset – TANDBERG 6000MXP User Manual
Page 106
106
TANDBERG 3000
MXP
&
6000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
Preset [1..15]
Name: <S: 0, 20>
Defines the Preset Name.
Example:
xconfiguration preset 1 name: AnyName
Presets should never be
modified manually, except for the
Preset Name.
Please refer to the xcommands:
-
NOTE!
The preset configura-
tions are numbered from 1 to
15, whilst the PresetStore/
PresetClear
commands are referring presets
from 0 to 14, i.e. the configura-
tions are offset by 1.
Preset [1..15]
Audio
Inputs
Microphone [1..3]
Mode: <On/Off>
Example:
xconfiguration preset 1 audio inputs mi-
crophone 2: on
Preset [1..15]
Audio
Inputs
Line [1..3]
Mode: <On/Off>
Example:
xconfiguration preset 1 audio inputs line
2: on
Preset [1..15]
MainVideoSource: <1/2/3/4/5/6>
Example:
xconfiguration preset 1 mainvideosource: 1
Preset [1..15]
DuoVideoSource: <0/1/2/3/4/5/6>
Example:
xconfiguration preset 1 duovideosource: 1
Preset [1..15]
SwitchVideoSource: <0/1/2/3/4/5/6>
Will switch the TANDBERG Video Switch to the given input when the preset is activated.
Example:
xconfiguration preset 1 switchvideosource: 1
Preset [1..15]
Camera
Brightness
Mode: <Manual/Auto>
Interpretation of the settings chosen will depend on the camera type you use. If in doubt,
consult your camera’s user documentation.
Example:
xconfiguration preset 1 camera brightness mode: auto
Preset