TANDBERG 6000MXP - Manual (Page 56)

56 D 13887.08
MAY 2008
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Exposure options should be used to limit the amount of information returned. By adding an
exposure option after the address expression (XPath or TANDBERG SimplePath), the system
can be instructed to return parts of the information within an element structure only.
<status-type command> <address expression> <exposure option>
Supported exposure options:
- • hides all value elements
-- • hides all sub-elements
Request for Call 1 element with no exposure option
xstatus call 1
*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing, logTag=3):
CallRate: 768
RemoteNumber: “558458”
Mute: Off
Microphone: Off
Duration: 10
MuteOutgoing: Off
Channels 1 (type=Incoming):
Rate: 768
Restrict: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H264
Resolution: CIF
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):
Rate: 768
Restrict: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H264
Resolution: CIF
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
*s/end
OK
Request for Call 1 element with exposure option - :
xstatus call 1 -
*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing, logTag=3):
Channels 1 (type=Incoming):
Encryption (status=Off): /
Audio (status=Active):
Video 1 (status=Active):
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):
Encryption (status=Off): /
Audio (status=Active):
Video 1 (status=Active):
Video 2 (status=Inactive): /
Data (status=Inactive): /
*s/end
OK
Request for Call 1 element with exposure option -- :
xstatus call 1 --
*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing, logTag=3):
*s/end
OK
XACLI – Status Type Commands – Exposure Options
About the TANDBERG API
About Exposure Options