TANDBERG 6000MXP - Manual (Page 74)

74
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
Conference SIP URI: <S: 0, 60>
The SIP URI is the address to use when calling the system using SIP.
Example: xconfiguration conference sip uri: MySIP_URI
Conference H263: <On/Off>
Enables/disables H.263 for both transmit and receive.
Example: xconfiguration conference h263: off
Conference H264: <On/Off>
Enables/disables H.264 for both transmit and receive.
Example: xconfiguration conference h264: on
Conference H264RCDO: <On/Off>
Enables/disables H.264 RCDO for both transmit and receive.
Example: xconfiguration conference h264rcdo: off
Conference G722: <On/Off>
Enables/disables G.722 for both transmit and receive.
Example: xconfiguration conference g722: on
Conference G722.1: <On/Off>
Enables/disables G.722.1 for both transmit and receive.
Example: xconfiguration conference g722.1: on
Conference G728: <On/Off>
Enables/disables G.728 for both transmit and receive.
Example: xconfiguration conference g728: on
Conference AAC-LD: <On/Off>
Enables/disables AAC-LD for both transmit and receive.
Example: xconfiguration conference aac-ld: on
Conference H331: <On/Off>
Turns broadcast mode on or off. When set to on it is possible to make an outgoing call without any capability exchange.
Example: xconfiguration conference h331: on
Conference H239: <On/Off>
Enables/disables H.239 for both transmit and receive.
Example: xconfiguration conference h239: on
Conference
cont...