TANDBERG 6000MXP - Manual (Page 240)

D 13887.08
MAY 2008 240
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Disclaimer and Safety Instructions
TANDBERG Video Switch
Disclaimer
The information in this document is furnished for informational purposes
only, is subject to change without prior notice, and should not be con-
strued as a commitment by TANDBERG.
TANDBERG reserves the right to amend any of the information given in
this document in order to take account of new developments.
Every effort has been made to supply complete and accurate information,
however, TANDBERG assumes no responsibility or liability for any errors or
inaccuracies that may appear in this document, nor for any infringements
of patents or other rights of third parties resulting from its use. No license
is granted under any patents or patent rights of TANDBERG.
For your protection please read these safety instructions completely
before you connect the equipment to the power source. Carefully observe
all warnings, precautions and instructions both on the apparatus and in
these operating instructions.
Retain this manual for future reference.
Water and Moisture
Do not operate the apparatus under or near water – for •
example near a bathtub, kitchen sink, or laundry tub, in a wet
basement, near a swimming pool or in other areas with high
humidity.
Do not touch the product with wet hands.
•
Cleaning
Unplug the apparatus from communication lines, mains •
power-outlet or any power source before cleaning or polishing.
Do not use liquid cleaners or aerosol cleaners. Use a lint-free
cloth lightly moistened with water for cleaning the exterior of
the apparatus.
Unplug the apparatus from communication lines before
•
cleaning or polishing. Do not use liquid cleaners or aerosol
cleaners. Use a lint-free cloth lightly moistened with water for
cleaning the exterior of the apparatus.
Ventilation
Do not block any of the ventilation openings of the apparatus. •
Never cover the slots and openings with a cloth or other mate-
rial. Never install the apparatus near heat sources such as
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not place the product in direct sunlight or close to a sur-
•
face directly heated by the sun.
Lightning
Never use this apparatus, or connect/disconnect communication
cables or power cables during lightning storms.
Dust
Do not operate the apparatus in areas with high concentration of
dust.
Vibration
Do not operate the apparatus in areas with vibration or place it
on an unstable surface.
Power Connection and Hazardous Voltage
The product may have hazardous voltage inside. Never at- •
tempt to open this product, or any peripherals connected to
the product, where this action requires a tool.
This product should always be powered from an earthed
•
power outlet.
Never connect attached power supply cord to other products.
•
In case any parts of the product has visual damage never •
attempt to connect mains power, or any other power source,
before consulting service personnel.
The plug connecting the power cord to the product power sup-
•
ply serves as the main disconnect device for this equipment.
The power cord must always be easily accessible.
Route the power cord so as to avoid it being walked on or
•
pinched by items placed upon or against it. Pay particular at-
tention to the plugs, receptacles and the point where the cord
exits from the apparatus.
Do not tug the power cord.
•
If the provided plug does not fit into your outlet, consult an •
electrician.
Never install cables, or any peripherals, without first unplug-
•
ging the device from it’s power source.
Always use the power supply (AC–DC adapter) provided with
•
this product.
Replace only with power supply (AC–DC adapter) specified by
•
TANDBERG.
Never connect the attached power supply (AC–DC adapter) to
•
other products.
Servicing
Do not attempt to service the apparatus yourself as opening •
or removing covers may expose you to dangerous voltages or
other hazards, and will void the warranty. Refer all servicing to
qualified service personnel.
Unplug the apparatus from its power source and refer servic-
•
ing to qualified personnel under the following conditions:
If the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the apparatus. •
If objects have fallen into the apparatus. •
If the apparatus has been exposed to rain or moisture •
If the apparatus has been subjected to excessive shock by •
being dropped.
If the cabinet has been damaged.
•
If the apparatus seems to be overheated. •
If the apparatus emits smoke or abnormal odor. •
If the apparatus fails to operate in accordance with the oper- •
ating instructions.
Accessories
Use only accessories specified by the manufacturer, or sold with
the apparatus.
Communication Lines
Do not use communication equipment to report a gas leak in the
vicinity of the leak.