TANDBERG 6000MXP - Manual (Page 199)

199
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
IP
Address:
SubnetMask:
Gateway:
V6:
Adress [1..2] (type = NA / IPv4 / IPv6 ):
DNS:
Server [1..5]:
Address:
Domain:
Name:
Example:
*s IP
Address: “10.47.11.179”
SubnetMask: “255.255.248.0”
Gateway: “10.47.8.1”
V6:
Address 1 (type=NA): “”
Address 2 (type=NA): “”
DNS:
Server 1:
Address: “10.0.0.10”
Server 2:
Address: “10.0.0.2”
Server 3:
Address: “”
Server 4:
Address: “”
Server 5:
Address: “”
Domain:
Name: “eu.tandberg.int”
*s/end
IP