TANDBERG 6000MXP - Manual (Page 156)

156
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Command Information
D 13887.08
MAY 2008
Required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Command Description Parameters Result parameters
when OK
Result parameters
when error
Example
FeedbackRegister Command used to
instruct the system to
return XML feedback
over HTTP(S) to
specific URLs. What
parts of the Status
and Configuration XML
documents to monitor
are specified by XPath
expressions.
The system supports
issuing feedback to 3
different URLs.
The system allows
a total of 20 XPath
expressions to be
registered, with a
maximum of 15 for a
single URL.
ID: <1..3>
ID for the registration. If this
parameter is omitted the system
uses the first vacant ID.
uRL (r) : <S: 0, 256>
The URL to post feedback to.
Expression.1..15: <S: 0, 256>
XPath expression
ID: <1..3> As above xcommand feedbackregister url:http://10.
47.14.185:8000
expression.1:status/call
expression.2:status/conference
*r Result (status=OK):
ID: 2
*r/end
OK
FIPSMode Command to activate
and deactivate FIPS
mode. Mode (r) : <On/Off>
Denotes whether the video system is
to be in FIPS mode or not.
On: “Entering FIPS
mode, restart
required.”
Off: “Exiting FIPS
mode, restart
required.”
The codec wil
restart.
As above xcommand fipsmode:off
*r Result (status=OK):
*r/end
OK
FloorRelease Command used to
release floor in a
MultiSite conference. None None As above xcommand floorrelease
*r Result (status=OK):
*r/end
OK
FloorRequest Command used to
request floor in a
MultiSite conference. None None As above xcommand floorrequest
*r Result (status=OK):
*r/end
OK
FeedbackRegister — FloorRequest