TANDBERG 6000MXP - Manual (Page 176)

176
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
PacketsDropped*: Appears with incoming calls only
Example:
*s Call 1 (status=Synced, type=Tlph, protocol=H323, direction=Incoming, logTag=5):
CallRate: 64
RemoteNumber: “5020019”
IncomingNumber: “5020059”
IncomingSubAddress: “”
Mute: Off
Microphone: On
Duration: 16
MuteOutgoing: Off
Channels 1 (type=Incoming):
Rate: 64
Restrict: Off
Encryption (status=On):
Type: AES-128
CheckCode: “E2957C90C5DF0649”
Audio (status=Active):
Protocol: G711
Rate: 64
RemoteIPAddress: “”
LocalIPAddress: “10.47.20.59:2334”
Encryption (status=On):
Type: AES-128
RSVP: Off
RSVPRate: 0
DynamicRate: 64
TotalPackets: 725
PacketLoss: 0
Jitter: 0
PacketsDropped: 0
Data (status=Inactive): /
Channels 2 (type=Outgoing):
Rate: 64
Restrict: Off
Encryption (status=On):
Type: AES-128
CheckCode: “E2957C90C5DF0649”
Audio (status=Active):
Protocol: G711
Rate: 64
RemoteIPAddress: “10.47.20.19:2334”
LocalIPAddress: “10.47.20.59:2334”
Encryption (status=On):
Type: AES-128
RSVP: Off
RSVPRate: 0
DynamicRate: 64
TotalPackets: 725
PacketLoss: 0
Jitter: 0
Data (status=Inactive): /
*s/end
Call
cont...