TANDBERG 6000MXP - Manual (Page 226)

We recommend that you check out the
TANDBERG web site regularly for updated
versions of this manual:
http://www.tandberg.com/support/
documentation.php
Controlling External Cameras
Assume you have your cameras connected to an external
control system, and that you want to be able to control
these cameras using the TANDBERG remote or from the
remote site using FECC (Far End Camera Control). To do
this you will need to make use of the Extcam Protocol.
This section of the Reference User Guide explains
Extcam Protocol Basics as well as how to interface to the
TANDBERG WAVE II camera and the TANDBERG Precision
HD camera.