TANDBERG 6000MXP User Manual
Page 206
206
TANDBERG 3000
MXP
&
6000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2
–
see
XACLI – Special commands – xpreferences
SIP
Server
(status =
Inactive / DNSFailed / Timeout / NoConnectionTCP / NoConnectionTLS / Active / Unknown
)
If status =
Inactive
the following will be included:
<Nothing>
If status =
DNSFailed / Timeout / NoConnectionTCP / NoConnectionTLS / Active / Unknown
the following will be included:
Address:
Authentication:
On/Off
Registration
(status =
Inactive / Registering / Registered / Deregister / Failed
)
If status =
Inactive/Registering/Registered/Deregister
the following will be included:
URI:
If status =
Failed
the following will be included:
URI:
Cause:
Example:
*s SIP:
Server (status=Active):
Address: “10.47.8.88”
Authentication:
Registration (status=Registered):
URI: “[email protected]”
*s/end
SIP