TANDBERG 6000MXP - Manual (Page 147)

147
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Command Information
D 13887.08
MAY 2008
Required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Command Description Parameters Result parameters
when OK
Result parameters
when error
Example
ConferenceDisconnect Command used to
disconnect all calls
connected to the
system. None None As above xcommand ConferenceDisconnect
*r Result (status=OK):
*r/end
OK
ConferenceTerminate ConferenceTerminate
is only valid if the
system is participant in
a MultiSite conference
supporting Chair
Control, and for
the system granted
chair. The command
will disconnect all
participants in the
conference (not only the
calls connected locally
to the system). None None As above xcommand ConferenceTerminate
*r Result (status=OK):
*r/end
OK
ConferenceDisconnect — ConferenceTerminate