TANDBERG 6000MXP - Manual (Page 84)

84
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
IEEE802.1x Mode: <On/Off>
Enables/disables 802.1x authentication
Example: xconfiguration ieee802.1x mode: on
The system may be connected
to an IEEE 802.1x LAN net-
work. Supported 802.1x proto-
cols are EAP-MD5, EAP-PEAP
and EAP-TTLS.
IEEE802.1x AnonymousIdentity: <S: 0, 64>
The 802.1x Anonymous ID string is to be used as unencrypted identity with EAP types that support different tunneled identity, EAP-PEAP and
EAP-TTLS. The anonymous ID, if set, will be used for the initial (unencrypted) EAP Identity Request
Example: xconfiguration ieee802.1x anonymousidentity:
IEEE802.1x Identity: <S: 0, 64>
The 802.1x Username is the username needed for 802.1x authentication.
Example: xconfiguration ieee802.1.x identity: MyString
IEEE802.1x Password: <S: 0, 64>
The 802.1x Password is the password needed for 802.1x authentication.
Example: xconfiguration ieee802.1x password: MyPassword
IEEE802.1x EAP-MD5: <On/Off>
Enables/disables the EAP-MD5 protocol
Example: xconfiguration ieee802.1.x eap-md5: on
IEEE802.1x EAP-TTLS: <On/Off>
Enables/disables the EAP-TTLS protocol
Example: xconfiguration ieee802.1.x eap-ttls: on
IEEE802.1x EAP-PEAP: <On/Off>
Enables/disables the EAP-PEAP protocol
Example: xconfiguration ieee802.1.x eap-peap: on
IMUX Custom BW64 Prefix: <S: 0, 12>
Defines the prefix to be used with the RS366 Custom IMUX at this bandwidth.
Example: xconfiguration imux custom bw64 prefix: xxx
IMUX Custom BW64 Suffix: <S: 0, 12>
Defines the suffix to be used with the RS366 Custom IMUX at this bandwidth.
Example: xconfiguration imux custom bw64 suffix: xxx
IMUX Custom BW64R Prefix: <S: 0, 12>
Defines the prefix to be used with the RS366 Custom IMUX at this restricted bandwidth.
Example: xconfiguration imux custom bw64r prefix: xxx
IEEE802.1x
cont...
— IMUX