TANDBERG 6000MXP - Manual (Page 161)

161
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Command Information
D 13887.08
MAY 2008
Required parameters are identified by an (r) appended to the parameter name. The (r) appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Command Description Parameters Result parameters
when OK
Result parameters
when error
Example
PresetClear Command used to clear
a preset previously
stored. Number (r) : <0..14>
The preset to clear.
None As above xcommand presetclear number:4
*r Result (status=OK):
*r/end
OK
PresetStore Command used to store
a preset. Number (r) : <0..14>
The number where to store the
preset.
None As above xcommand presetstore number:4
*r Result (status=OK):
*r/end
OK
ProfileActivate Command to activate an
existing user profile. Name (r) : <S: 0, 16>
The name of the user profile to
activate.
None As above xcommand profileactivate:profilename
*r Result (status=OK):
*r/end
OK
ProfileCreate Configure the video
system and use this
command to create a
new user profile. Name (r) : <S: 0, 16>
The name of the user profile to
create.
None As above xcommand profilecreate:profilename
*r Result (status=OK):
*r/end
OK
ProfileDelete Command to delete an
user profile. Name (r) : <S: 0, 16>
The name of the user profile to
delete.
None As above xcommand profiledelete:profilename
*r Result (status=OK):
*r/end
OK
ProfileList Command to list user
profiles. None None As above xcommand profilelist
*r Result (status=OK):
Available 1: “Office”
Available 2: “Home”
*r/end
OK
ScreensaverActivate Command used to
activate screensaver. None None As above xcommand screensaveractivate
*r Result (status=OK):
*r/end
OK
PresetClear — ScreensaverActivate