Video outputs animation <on/off, Video, Cont – TANDBERG 6000MXP User Manual
Page 118
118
TANDBERG 3000
MXP
&
6000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
Video
cont...
Video
Inputs
Source [1..6]
Quality: <Motion/Sharpness>
When encoding and transmitting video there will be a tradeoff between high resolution and high framerate. For some video
sources it is more important to transmit high framerate than high resolution and vice versa. The Quality setting specifies whether
to give priority to high frame rate or to high resolution for a given source.
Motion: When there is a need for higher frame rates, typically when a large number of participants are present or when there is a
lot of motion in the picture.
At low bit rate the following resolution will be transmitted:
•
CIF
will be used from a PAL video input
•
SIF
from NTSC
•
w288p
from wide format (HD720p) input
•
VGA/SVGA/XGA
from PC, Digital Clarity
At high bit rate the following resolution will be transmitted:
•
448p
will be used from a PAL video input if Natural Video is ‘Off’ or ‘Auto’ or if Natural Video is ‘x kbps’ and the bit rate is lower
than x kbps
•
400p
from NTSC if Natural Video is ‘Off’ or ‘Auto’ or if Natural Video is ‘x kbps’ and the bit rate is lower than x kbps
•
iCIF
will be used from a PAL video input, if Natural Video is ‘x kbps’ and the bit rate is higher than or equal to x kbps
•
iSIF
from NTSC, if Natural Video is ‘x kbps’ and the bit rate is higher than or equal to x kbps
•
w448p
will be used from a wide format (HD720p) input
•
VGA/SVGA/XGA
from PC, Digital Clarity
Sharpness: Improved quality of detailed images and graphics:
•
4xCIF
will be used from a PAL video input, Digital Clarity
•
4xSIF
will be used from a NTSC video input, Digital Clarity
•
w720p
will be used from a wide format (HD720p) input
•
VGA/SVGA/XGA
will be used from a PC input, Digital Clarity
Example:
xconfiguration video inputs source 5 quality: sharpness
Video
Outputs
Animation: <On/Off>
The new PiP/PoP animation makes the windows fade or slide into position when changing the picture layout. PiP means Picture in Picture layout and PoP
means Picture outside Picture layout.
Example:
xconfiguration video outputs animation: on
Video
Outputs
ScreenFormatTV: <4:3/16:9>
Specifies whether the monitors connected to the TV (S-video/Composite) outputs are 4:3 or 16:9 monitors.
If this configuration is not set according to the monitors in use, the images will either be over-stretch or compressed.
Example:
xconfiguration video outputs screenformattv: 4:3
Video
Outputs
ScreenFormatPC: <4:3/16:9>
Specifies whether the monitors connected to the PC (DVI) outputs are 4:3 or 16:9 monitors.
If this configuration is not set according to the monitors in use, the images will either be stretched or compressed. See FormatPCWideScreen for more on
this.
Example:
xconfiguration video outputs screenformatpc: 16:9