Serialport 1 direct buffer: <0 84, Sip replyto uri: <s: 0, 60, Serialport – TANDBERG 6000MXP User Manual
Page 111: Cont
111
TANDBERG 3000
MXP
&
6000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration-type Commands – xconfiguration / configuration.xml
D 13887.08
MAY 2008
SerialPort [1]
Direct
Buffer: <0..16384>
NOTE!
Port 1 Only
Specifies the size of the buffer used in direct mode. Try setting this value higher if you need a continuous stream of data on the receiving end. Higher
values introduces more delay.
Example:
xconfiguration serialport 1 direct buffer: 5120
SerialPort [1..2]
BaudRate: <1200/2400/4800/9600/19200/38400/57600/115200>
Specify the baud rate on a serial port.
Example:
xconfiguration serialport 1 baudrate: 9600
SerialPort [1..2]
Parity: <None/Odd/Even>
Specify the Parity on a Serial Port
Example:
xconfiguration serialport 1 parity: odd
SerialPort [1..2]
DataBits: <7/8>
Specify the number of databits on a Serial Port
Example:
txconfiguration serialport 1 databits: 7
SerialPort [1..2]
StopBits: <1/2>
Specify the number of stopbits on a Serial Port
Example:
xconfiguration serialport 1 stopbits: 2
SIP
Mode: <On/Off>
On: Setting the SIP mode to on will enable the system for incoming and outgoing SIP calls.
Off: Setting the SIP mode to off will disable incoming and outgoing SIP calls from the system.
Example:
xconfiguration sip mode: on
SIP
ReplyTo
URI: <S: 0, 60>
If configured it is this URI that will be displayed in the call lists.
Example:
xconfiguration sip replyto uri:
SIP
Server
Discovery: <Manual/Auto>
Manual: When Manual is selected, the manually configured SIP Server address will be used
Auto: When Auto is selected, the SIP Server address is obtained using Dynamic Host Configuration Protocol (DHCP).
Example:
xconfiguration sip server discovery: manual
SIP
Server
Address: <S: 0, 255>
The Server Address is the manually configured address for the outbound proxy and registrar. It is possible to use a fully qualified domain name, or an IP
address. The default port is 5060 for TCP and UDP, but another one can be provided
Example:
xconfiguration sip server address:
SerialPort
cont...
— SIP