TANDBERG 6000MXP - Manual (Page 201)

201
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
PRI (ready = True / False )
If ready = False the following will be included:
Layer1Alarm: RedAlarm / YellowAlarm / BlueAlarm
Example:
*s PRI (ready=False):
Layer1Alarm: RedAlarm
*s/end
If ready = True the following will be included:
Channel [1..24/31] (type = BChannel / DChannel
status = NA / Idle / Calling / Answering / Proceeding / Connect / Disconnecting / Disconnected )
If type = DChannel and status = NA the following will be included:
<Nothing>
If type = BChannel / DChannel and status = Idle the following will be included:
<Nothing>
If type = BChannel and status = Calling / Answering / Proceeding / Connect the following will be included:
CallingNumber:
ConnectionTime:
If type = BChannel and status = Disconnecting / Disconnected the following will be included:
CallingNumber
CauseLocation
ChannelCause
ConnectionTime
PRI