Warning – TANDBERG 6000MXP User Manual

Page 212

Advertising
background image

212

TANDBERG 3000

MXP

&

6000

MXP

REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Status Information – xstatus /xstatus.xml

D 13887.08
MAY 2008

Status information followed by a

*

will not be shown unless Detailed Level has been set to 2

see

XACLI – Special commands – xpreferences

Warning

Warning [1..10] (status =

NA / Active

)

If status =

NA

the following will be included:

<Nothing>

Example:
*s Warning 7 (status=NA): /

*s/end

If status =

Active

the following will be included:

ID:

101 / 102 / 131 / 132 / 133 / 134 / 161 / 191 / 192 / 193 / 201 / 202 / 203 / 204 / 205 / 206 / 207 / 208 / 301 / 1001 / 1002 / 1003

Value:

1

Example:
*s Warning 1 (status=Active):

ID: 101

Value: 1

*s/end

ID Description

101 Warning BRI 1 Layer 1 Alarm: Line is disconnected
102 Warning BRI 2 Layer 1 Alarm: Line is disconnected
131 Warning PRI Layer 1 Red Alarm: Red alarm or Loss of signal (LOS) means that there is no signal and thus no framing information received (this has the same effect as pulling out the PRI cable)
132 Warning PRI Layer 1 Blue Alarm: Blue alarm indicates that the network on the far side of the CSU is unavailable
133 Warning PRI Layer 1 Yellow Alarm: Yellow alarm or Remote Alarm Indicator (RAI) may indicate a weak or noisy signal or a broken connector in the TX part of the system PRI cable
134 Warning PRI Layer 2 Not Active
161 Warning External Network, No Clock: If no clock is detected you will not be able to place calls
191 Warning G.703 Layer 1 Red Alarm: Red alarm or Loss of signal (LOS) means that there is no signal and thus no framing information received (this has the same effect as pulling out the PRI cable)
192 Warning G.703 Layer 1 Blue Alarm: Blue alarm indicates that the network on the far side of the CSU is unavailable
193 Warning G.703 Layer 1 Yellow Alarm: Yellow alarm or Remote Alarm Indicator (RAI) may indicate a weak or noisy signal or a broken connector in the TX part of the system PRI cable
201 Warning H.323 GateKeeper Rejected: Registration to the GateKeeper has been rejected. Please check GateKeeper setting
202 Warning H.323 GateKeeper Rejected, duplicate alias: GateKeeper registration is rejected because you try to register with an Alias, which is already registered on the GateKeeper
203 Warning H.323 GateKeeper Resources Unavailable
204 Warning H.323 GateKeeper Rejected, invalid alias: The alias you try to register with is not accepted by the GateKeeper
205 Warning H.323 GateKeeper Rejected Security Denial: The GateKeeper rejects registration because the user name and/or password is incorrect
206 Warning H.323 GateKeeper Rejected, Not Reachable
207 Warning H.323 GateKeeper Rejected, No Authenitcation Configuration
208 Warning H.323 GateKeeper Rejected, No Authenitcation Time
301 Warning IP No Net: The system does not detect any IP connection
1001 Warning High Packet Loss
1002 Warning High Jitter
1003 Warning High Packet Drop

Advertising
This manual is related to the following products: