TANDBERG 6000MXP - Manual (Page 180)

180
TANDBERG 3000 MXP & 6000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Status Information – xstatus /xstatus.xml
D 13887.08
MAY 2008
Status information followed by a
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
Example:
*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Incoming, logTag=6):
CallRate: 768
RemoteNumber: “5020019”
IncomingNumber: “5020059”
IncomingSubAddress: “”
Mute: Off
Microphone: On
Duration: 10
MuteOutgoing: Off
Channels 1 (type=Incoming):
Rate: 768
Restrict: Off
Encryption (status=On):
Type: AES-128
CheckCode: “C442803A9A470B7F”
Audio (status=Active):
Protocol: AAC-LD
Rate: 64
RemoteIPAddress: “”
LocalIPAddress: “10.47.20.59:2334”
Encryption (status=On):
Type: AES-128
RSVP: Off
RSVPRate: 0
DynamicRate: 64
TotalPackets: 474
PacketLoss: 0
Jitter: 1
PacketsDropped: 0
Video 1 (status=Active):
Protocol: H264
Resolution: Off
Rate: 704
RemoteIPAddress: “”
LocalIPAddress: “10.47.20.59:2336”
Encryption (status=On):
Type: AES-128
RSVP: Off
RSVPRate: 0
DynamicRate: 677
Call
cont...