HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 104
Figure 50 Example of a configuration definition for backup or restore between storage systems
The following shows an example of the RAID Manager configuration definition file for a database
server
Host0
in the local site in the above configuration example. In this example, multiple secondary
volumes are allocated to one primary volume, and a separate configuration definition file is created
for each backup target server.
•
RAID Manager configuration definition file (
horcm0.conf
)
HORCM_DEV
##dev_group dev_name port# TargetID LU# MU#
SI01 DEV11 CL2-C 8 6 0
SI01 DEV21 CL2-C 8 7 0
SI02 DEV12 CL2-C 8 6 1
SI02 DEV22 CL2-C 8 7 1
SI03 DEV13 CL2-C 8 6 2
SI03 DEV23 CL2-C 8 7 2
HORCM_INST
##dev_group ip_address service
SI01 Host1 12501/udp
SI02 Host1 12501/udp
SI03 Host1 12501/udp
Preparation for using Application Agent
104