HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 157
Description
Parameter
Specify the NetBackup master server name used to query the backup target
(maximum of 255 bytes). Specify a host name that can be resolved by the OS or
an IP address (IPv4). If this parameter is omitted, the name of the host that executed
the command is used as the NetBackup master server name. This parameter is
applicable when NetBackup 6.5 or later is used.
NBU_MASTER_SERVER
Specify whether the
include
command can be executed (maximum of 8 bytes).
This parameter is not case sensitive.
•
If
YES
is specified
Application Agent registers the backup target path in the policy (class) by ex-
ecuting NetBackup's
bpplinclude
or
bpclinclude
command. After execut-
ing the
drmmediabackup
command, Application Agent deletes the backup
target path that was registered in the policy (class). Application Agent also
registers the backup target media information in the backup catalog.
•
If a character string other than
YES
is specified
Application Agent does not register the backup target path in the policy (class),
and the user must use NetBackup to register the backup target path in the
policy (class).
When this parameter is omitted, the result is the same as when
YES
is specified.
You can specify this parameter when you use NetBackup 6.5 or later.
INCLUDE_EXEC
Specify the absolute path of the mount point of the volume to be backed up (use
a maximum of 255 bytes).
If no entry for the mount point to be backed up can be found, values specified for
CLASS
or
POLICY
and for
SCHEDULE
under "
MOUNT_POINT=default
" will be
used.
Specify the mount point in the tape backup configuration definition file in the order
in which Application Agent automatically mounts them during a tape backup.
Application Agent mounts the drives according to the following rules:
•
If the mount point is to be passed in an argument for tape backup or restoration:
The system selects the unoccupied drives from the specified drives and mounts
them in alphabetical order.
•
If the mount point is not specified for tape backup or restoration:
The system selects the unoccupied drives from all unoccupied drives and mounts
them in alphabetical order.
Select either of the rules described above in accordance with the actual operation
method for tape backup or restoration, check the unoccupied drives using Windows
Explorer or other tools, and specify the unoccupied drives in alphabetical order.
•
When the backup is of an SQL Server Database:
In addition to the mount point that contains the database to be backed up, you
must specify the volume that contains the VDI metafile. For this specification,
enter the absolute path of the directory containing the VDI metafile or write
default
.
The VDI metafile storage directory must be specified at the end of
MOUNT_POINT
and in front of
default
.
MOUNT_POINT
Specify the
CLASS
or
POLICY
name to be used when backing up data that is
stored in the path specified for
MOUNT_POINT
(using 255 bytes or less).
You can use either
POLICY
or
CLASS
. However, you cannot specify both
POLICY
and
CLASS
for the same
MOUNT_POINT
.
CLASS
or
POLICY
Application Agent CLI User Guide
157