HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 501
4.
On backup server 1, restore the backup data from the tape device to the secondary volume.
Execute the
drmmediarestore
command with backup ID
0000000002
specified.
The backup ID
0000000001
is deleted, and the new backup ID
0000000003
is registered.
PROMPT> drmmediarestore 0000000002
KAVX0001-I The drmmediarestore command will now start.
KAVX0404-I Restoration will now start.
To see more details on restoration progress, use the monitoring method of the backup
management product.
Source = W:
Target = W:
KAVX0404-I Restoration will now start.
To see more details on restoration progress, use the monitoring method of the backup
management product.
Source = X:
Target = X:
KAVX0405-I Restoration has finished.
Source = W:
Target = W:
KAVX0405-I Restoration has finished.
Source = X:
Target = X:
KAVX0040-I The backup ID has been assigned as follows:
Backup ID = 0000000003
KAVX0002-I The drmmediarestore command will now end.
PROMPT>
5.
On backup server 1, check the execution result of the restoration from the tape device to the
secondary volume.
PROMPT> drmexgcat
STORAGEGROUP: /EXCHANGE
BACKUP-ID: 0000000003 BACKUP-MODE: VSS STORAGEGROUP: /EXCHANGE ORIGINAL-ID: 0000000001
START-TIME: 2010/01/01 11:00:00 END-TIME: 2010/01/01 11:30:00 HOSTNAME: EXG_SRV1
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE COPY-GROUP
M MAILBOXSTORE Mail1 D:\Mail1\mail.edb D: - Harddisk2
EXG001,B001
- - - - - - -
EXG001,B001
T TRANSACT Mail1 E:\Mail1\E01*.log E: - Harddisk3
EXG001,B002
- - - - - - -
EXG001,B002
C CHECKPOINT Mail1 E:\Mail1\Mail2\E01.chk E: - Harddisk3
EXG001,B002
- - - - - - -
EXG001,B002
PROMPT>
6.
On backup server 1, unmount the secondary volume on which the restoration from the tape device
has been completed.
Execute the
drmumount
command with backup ID
0000000002
specified.
PROMPT> drmumount 0000000002
KAVX0001-I The drmumount command will now start.
KAVX0406-I Unmounting will now start.
Mount point = W:
KAVX0407-I Unmounting has finished.
Mount point = W:
KAVX0406-I Unmounting will now start.
Mount point = X:
KAVX0407-I Unmounting has finished.
Mount point = X:
KAVX0002-I The drmumount command will now end.
PROMPT>
Application Agent CLI User Guide
501