HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 468)

10. Confirm that the file was imported correctly.
Execute the drmexgcat command on database server B to check whether the backup information
for the date on which backup from the primary volume to the secondary volume was performed
was imported to database server B.
DBServer B > drmexgcat
STRAGEGROUP: STR1
BACKUP-ID:0000000002 BACKUP-MODE: VSS STRAGEGROUP: STR1 ORIGINAL-ID:0000000001
START-TIME:2007/11/01 10:00:00 END-TIME: 2007/11/01 10:05:00 HOSTNAME:EXG_SRV1
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE
COPY-GROUP
M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.edb D: - Harddisk1
EXG003,B001
- - - - - - -
EXG003,B001
P PUBLICSTORE PUBLIC1(STR1) D:\STR1\pub1.edb D: - Harddisk1
EXG003,B001
- - - - - - -
EXG003,B001
T TRANSACT - E:\STR1\E00*.log E: - Harddisk2
EXG004,B001
- - - - - - -
EXG004,B001
C CHECKPOINT - E:\STR1\E00.chk E: - Harddisk2
EXG004,B001
- - - - - - -
EXG004,B001
DBServer B >
11. Restore the data on the secondary volume to the primary volume.
Execute the drmexgrestore command on database server B to perform a roll-forward restore
of the data on the secondary volume to the primary volume. To use the automatic seed function,
specify the Exchange environment configuration file in the
-ef option.
DBServer B > drmexgrestore 0000000002 -resync -recovery -ef exchange.conf
KAVX0001-I The drmexgrestore command will now start.
KAVX1526-I The Exchange environment configuration file has been read.
Exchange environment configuration file = exchange.conf
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = name-of-database-server-A
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = name-of-backup-server-B
KAVX1732-I The replication function of Exchange Server has stopped.
Storage group name = STR1
KAVX1805-I The information store will now be dismounted.
Storage group name = STR1
KAVX1700-I Restore processing will now start.
KAVX5111-I Performing unmounting.
Mount point name = D:
KAVX5108-I Resynchronizing a copy group.
Copy group name = EXG003,B001
KAVX5109-I Dividing a copy group in pair.
Copy group name = EXG003,B001
KAVX5110-I Performing mounting.
Mount point name = D:
KAVX1701-I Restore processing has finished.
KAVX1806-I The information store will now be mounted.
Storage group name = STR1
KAVX1736-I The seed processing will now start.
Storage group name = STR1
KAVX1737-I The seed processing has finished.
Storage group name = STR1
KAVX1734-I The replication function of Exchange Server has resumed.
Storage group name = STR1
KAVX0002-I The drmexgrestore command will now end.
DBServer B >
Operation for Exchange databases 468