HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 188)

Format of operation definition files
An operation definition file is created, for each operation ID that uniquely identifies the processing
target, with a name in the following format:
Application-Agent-installation-destination \DRM\script\conf\_ operation-ID .dat
The sample file for the operation definition file is stored in the following location:
Application-Agent-installation-folder\DRM\script\sample
The following table shows the entries of an operation definition file, their contents, and the maximum
value length (in bytes). Specification of these entries is required.
Table 56 Example: contents and maximum value length of each entry in an operation definition file
(when the backup is of a file system)
Maximum
number of
characters
Information to be specified Specification item
32
Specify a character string identifying the type of the backup ob-
ject. Specify
FILESYSTEM .
BACKUP_OBJECT
128
Specify the file system name.Specify the virtual server name for
the cluster resource. This virtual server name must be defined in
DRM_DB_PATH= directory-on-the-shared-disk ; virtual-server-name
in the Application Agent configuration definition file
(
init.conf ).
DB_SERVER_NAME
128
Specify the mount point directory name or mount point directory
list file name. To specify multiple mount points, specify a mount
point directory list file.
If the name contains spaces, enclose the entire name string in
double quotation marks (
" ).
INSTANCE_NAME
Do not enter a
value.
Specify this item without a value by specifying TARGET_NAME= . TARGET_NAME
128
Specify this value. Specifies the FTP service root directory. This
value must be equal to the home directory name of the IIS FTP
service on the backup server.
You cannot omit this value.
FTP_HOME_DIR
128
Specify this value. Specifies the name of the subdirectory to be
created under the FTP service root directory.
#
A temporary directory is created in the subdirectory specified
by this setting. The extended commands transfer files to this
subdirectory, via FTP.
If this value is omitted, a subdirectory named
HPtM will be
automatically created.
FTP_SUB_DIR
1
This entry specifies the file server configuration. When the file
server has a cluster configuration, enter
1 . When the file server
does not have a cluster configuration, enter 0 .
SET_DRM_HOSTNAME
#
The specified subdirectory must satisfy the following:
Preparation for using Application Agent 188