HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 205)

Omission
Multiple
specifica-
tion
#1
Meaning and specifiable values Entry name
Allowed
#3
Not al-
lowed
User processing section: Indicates the beginning of the "user
processing for pair splitting". In this section, define commands
to be executed as part of user processing for pair splitting.
[SPLIT_PROC]
#2,
#9
Allowed
#3
Not al-
lowed
User processing section: Indicates the beginning of the "user
processing for termination". In this section, define commands to
be executed as part of user processing for termination. [FIN-
ISH_PROC]
#2,
#9
Allowed
#3
Not al-
lowed
User processing section: Indicates the beginning of the "user
post-processing." In this section, define commands to be executed
after the backup operation.
[POST_PROC]
#2,
#11
Allowed
#3
Allowed
#4
Indicates the beginning of a command definition section.
• This item must be specified within a user processing section.
• If two or more command definitions are included in your
code, they will be executed individually in the order in which
they are coded.
• When a value other than NOWAIT is specified in TIMEOUT ,
the next command does not start executing until the executing
command finishes or times out (in other words, only one
command executes at a time).
• When TIMEOUT=NOWAIT is specified, the subsequent com-
mand executes without waiting for the preceding command
to finish.
• The item specified in the command definition section is valid
only on the command definition section for the target com-
mand. The other command definition sections are not affected.
[CMD]
Application Agent CLI User Guide 205