HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 208
Omission
Multiple
specifica-
tion
#1
Meaning and specifiable values
Entry name
Allowed
Not al-
lowed
Specifies the command timeout value. Specifiable values are as
follows:
Timeout value (in seconds)
#8
•
The range of specifiable values is from
0
to
86400
.
•
Use one-byte numeric characters only.
•
No timeout will occur if
0
is specified here.
NOWAIT
Once a command starts successfully, there is no wait for the
command to finish. With this specification, the command
return value becomes
0
.
The standard output and standard error output from the
command are not output to the Application Agent standard
output log.
•
The default is
600
(10 minutes).
TIMEOUT
#5
Allowed
Not al-
lowed
Specifies the execution server of the specified command.
Specifiable values are as follows:
LOCAL
(default)
Executes the specified command on the local server.
REMOTE
Executes the specified command on the backup server spe-
cified with the
-s
option in the backup command.
•
In the
[RESYNC_PROC]
,
[SPLIT_PROC]
, and
[FIN-
ISH_PROC]
sections, the setting is ignored (the value is fixed
to
LOCAL
).
LOCATION
#5
Allowed
Not al-
lowed
Specifies whether the script can be executed based on the
execution status
#7
of the parent command (command that calls
the script). Specifiable values are as follows:
NORMAL
(default)
Executes the command specified in
CMDLINE
only if the
execution status of the parent command is normal.
ERROR
Executes the command specified in
CMDLINE
only if the
execution status of the parent command is error. The execu-
tion result of the parent command becomes error regardless
of the script result.
ANY
Always executes the command specified in
CMDLINE
. If the
execution status of the parent command is error, the execu-
tion result of the parent command becomes error regardless
of the script result.
•
In the
[RESYNC_PROC]
,
[SPLIT_PROC]
, and
[FIN-
ISH_PROC]
sections, the setting is ignored (the value is fixed
to
NORMAL
).
•
In the
[PRE_PROC]
section, specify
ANY
or
NORMAL
. If you
specify
ERROR
, the commands in the
[PRE_PROC]
section
will not be executed.
PAR-
ENT_STAT
#5
Preparation for using Application Agent
208