HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 515)

size of the drm_nbu_restore.log file reaches 10 MB, the contents of the file are moved to
drm_nbu_restore.log.old . If drm_nbu_restore.log.old already exists, it is overwritten.
#4
If multiple directories of the same virtual server name are specified in the DRM_DB_PATH para-
meter, a number n will be appended to the name of the directories from which log data will be
collected. This number is based on the order that the directories are specified in the DRM_DB_PATH
parameter. Note that no number will be appended to the first directory.
#5
If multiple directories of the same virtual server name are specified in the SCHD_MAP_PATH
parameter, a number n will be appended to the name of the directories from which log data will
be collected. This number is based on the order that the directories are specified in the
SCHD_MAP_PATH parameter. Note that no number will be appended to the first directory.
#6
If multiple directories of the same virtual server name are specified in the EXEC_LOG_OUTPUT
parameter, a number
n
will be appended to the name of the directories from which log data will
be collected. This number is based on the order that the directories are specified in the EX-
EC_LOG_OUTPUT parameter. Note that no number will be appended to the first directory.
RAID Manager information
Collect information pertaining to RAID Manager, as shown in the following table. Also, in cases where
the problem occurred over a network connection, you will need to collect files from the connected
machine.
Table 107 RAID Manager information
Default files Summary Information type
All of the following corresponding files:
system-directory
\horcm*
Files for each type of
RAID Manager environ-
ment setting
#1
Environment settings
All of the following corresponding files:
system-drive
\HORCM\log*
Each type of RAID Man-
ager log files
#2
Log information
--
Execution result of the
RAID Manager
in-
qraid , raidscan or
pairdisplay com-
mand
RAID configuration
information
Legend: -- indicates that the information type is not applicable.
#1
If you have specified other files, collect the applicable data.
#2
If you have set up the system so that log files are output to other directories, collect data from the
applicable directories.
Application Agent CLI User Guide 515