HP Serveur lame HP ProLiant BL465c Gen8 - Manual (Page 460)

9. Back up the backup data on the secondary volume to tape.
Execute the drmmediabackup command on backup server B to back up the backup data on
the secondary volume to tape.
An unused backup ID of 0000000002 is assigned.
BKServer B > drmmediabackup 0000000001
KAVX0001-I The drmmediabackup command will now start.
KAVX0402-I Backup processing will now start.
To see more details on backup progress, use the monitoring
method of
the backup management product.
Source = W:
KAVX0402-I Backup processing will now start.
To see more details on backup progress, use the monitoring
method of
the backup management product.
Source = X:
KAVX0403-I Backup processing has finished.
Source = W:
KAVX0403-I Backup processing has finished.
Source = X:
KAVX0040-I The backup ID has been assigned as follows:
Backup ID = 0000000002
KAVX0002-I The drmmediabackup command will now end.
BKServer B >
10. Confirm that the data was correctly backed up to tape.
Execute the drmtapecat command on backup server B to check whether there is backup
information for the date on which backup from the primary volume to the secondary volume was
performed.
BKServer B > drmtapecat -backup_id 0000000002
BACKUP-ID BACKUP-OBJECT SNAPSHOT TIME EXPIRATION TIME BACKUP-MEDIA
0000000002 MSEXCHANGE 2002/06/01 11:00:00 2002/06/02 11:00:00 MEDIA1
BKServer B >
11. Unmount the secondary volume on which the backup data is stored.
Execute the drmumount command on backup server B to unmount the secondary volume.
BKServer B > drmumount 0000000001
KAVX0001-I The drmumount command will now start.
KAVX0406-I Unmounting will now start.
Mount point = W:
KAVX0407-I Unmounting has finished.
Mount point = W:
KAVX0406-I Unmounting will now start.
Mount point = X:
KAVX0407-I Unmounting has finished.
Mount point = X:
KAVX0002-I The drmumount command will now end.
BKServer B >
Operation for Exchange databases 460