HP Serveur lame HP ProLiant BL465c Gen8 User Manual
Page 444
4.
Confirm that the data was restored correctly from the tape to the secondary volume.
Execute the
drmexgcat
command on backup server A to check whether the backup catalog
information for the date that the backups from the primary volumes to the secondary volumes
were performed was restored to backup server A:
BKServer A > drmexgcat
STRAGEGROUP: STR1
BACKUP-ID:0000000003 BACKUP-MODE: VSS STRAGEGROUP: STR1 ORIGINAL-ID:0000000001
START-TIME:2007/11/01 10:00:00 END-TIME: 2007/11/01 10:05:00 HOSTNAME:EXG_SRV1
T OBJECT INFORMATIONSTORE FILE FS DG DEVICE
COPY-GROUP
M MAILBOXSTORE MAILBOX1(STR1) D:\STR1\priv1.edb D: - Harddisk1
EXG001,B001
- - - - - - -
EXG001,B001
P PUBLICSTORE PUBLIC1(STR1) D:\STR1\pub1.edb D: - Harddisk1
EXG001,B001
- - - - - - -
EXG001,B001
T TRANSACT - E:\STR1\E00*.log E: - Harddisk2
EXG002,B001
- - - - - - -
EXG002,B001
C CHECKPOINT - E:\STR1\E00.chk E: - Harddisk2
EXG002,B001
- - - - - - -
EXG002,B001
BKServer A >
5.
Unmount the secondary volume after restoration of the backup data is finished.
Execute the
drmumount
command on backup server A to unmount the secondary volume:
BKServer A > drmumount 0000000002
KAVX0001-I The drmumount command will now start.
KAVX0406-I Unmounting will now start.
Mount point = W:
KAVX0407-I Unmounting has finished.
Mount point = W:
KAVX0406-I Unmounting will now start.
Mount point = X:
KAVX0407-I Unmounting has finished.
Mount point = X:
KAVX0232-I Hid EXG001,B001.
KAVX0232-I Hid EXG002,B001.
KAVX0234-I Rerecognizes the physical volume.
KAVX0235-I Rerecognized the physical volume.
KAVX0002-I The drmumount command will now end.
BKServer A >
6.
Export the backup catalog information to a temporary file.
To restore from the secondary volume to the primary volume, you must copy to the database
server the information about the restore operation that was performed from the tape to the
secondary volume.
Execute the
drmdbexport
command on database server A to export the restore operation-related
information to a temporary file:
BKServer A > drmdbexport 0000000003 -f C:\FTP_ROOT\0000000003.drm
KAVX0001-I The drmdbexport command will now start.
KAVX0002-I The drmdbexport command will now end.
BKServer A >
Operation for Exchange databases
444